Potrošniki: 2-letna zakonska garancija EU (Direktiva 2019/771). V primeru napake imate pravico do popravila, zamenjave ali vračila. Poslovne stranke: 12-mesečna komercialna garancija.
Description
The LED lamp combines 28 W of power, high brightness, and a wide 180° beam angle. Its 6000 K color temperature provides cool white light suitable for illuminating workspaces during photography and video recording. The 2800 lm luminous flux delivers intense, even illumination, while flicker-free operation helps maintain consistent image quality when recording videos.
The standard E27 screw base makes installation quick and convenient. The lamp requires no complicated installation and lights up immediately after switching on, without delay or flickering. Combining diffused lighting, high brightness, and ease of use, LOOMI HALO LED LIGHT is a practical solution for creating professional-looking visual content.
Technical specifications:
Power: 28 W;
Base type: E27, standard screw base;
Input voltage: AC 175–240 V;
Color temperature: 6000 K;
Luminous flux: 2800 lm;
Beam angle: 180°;
Flicker-free lighting;
Soft diffused light;
High brightness;
Easy installation;
Housing material: ABS/PC;
Protection rating: IP65;
Lifespan: at least 30,000 hours;
Diameter: 16 cm;
Warranty: 1 year.
Instructions for use and installation:
Switch off the power. Before installation, turn off the corresponding power switch and ensure that no electrical current is present to avoid the risk of electric shock.
Check compatibility. The lamp features a standard E27 screw base and is designed exclusively for sockets of this type. Do not attempt to install it in smaller E14 sockets or apply force.
Install the lamp. Hold the lamp by its heat sink base, align the threads with the socket, and carefully rotate clockwise until securely fitted. Do not over-tighten or use excessive force.
Check operation. Once installation is complete, switch on the power. The lamp lights up instantly, without delay or flickering.
Precautions:
Always switch off the electrical power before installation to prevent the risk of electric shock.
Use the lamp only with E27 sockets. Do not install it in E14 sockets.
Check that the lamp's rated voltage and electrical specifications are compatible with the power supply to prevent damage or burnout.
Do not apply excessive force when installing or tightening the lamp.
The standard E27 screw base makes installation quick and convenient. The lamp requires no complicated installation and lights up immediately after switching on, without delay or flickering. Combining diffused lighting, high brightness, and ease of use, LOOMI HALO LED LIGHT is a practical solution for creating professional-looking visual content.
Technical specifications:
Power: 28 W;
Base type: E27, standard screw base;
Input voltage: AC 175–240 V;
Color temperature: 6000 K;
Luminous flux: 2800 lm;
Beam angle: 180°;
Flicker-free lighting;
Soft diffused light;
High brightness;
Easy installation;
Housing material: ABS/PC;
Protection rating: IP65;
Lifespan: at least 30,000 hours;
Diameter: 16 cm;
Warranty: 1 year.
Instructions for use and installation:
Switch off the power. Before installation, turn off the corresponding power switch and ensure that no electrical current is present to avoid the risk of electric shock.
Check compatibility. The lamp features a standard E27 screw base and is designed exclusively for sockets of this type. Do not attempt to install it in smaller E14 sockets or apply force.
Install the lamp. Hold the lamp by its heat sink base, align the threads with the socket, and carefully rotate clockwise until securely fitted. Do not over-tighten or use excessive force.
Check operation. Once installation is complete, switch on the power. The lamp lights up instantly, without delay or flickering.
Precautions:
Always switch off the electrical power before installation to prevent the risk of electric shock.
Use the lamp only with E27 sockets. Do not install it in E14 sockets.
Check that the lamp's rated voltage and electrical specifications are compatible with the power supply to prevent damage or burnout.
Do not apply excessive force when installing or tightening the lamp.
LOOMI HALO LED LIGHT (SOFT LIGHT WITH A SOFTBOX EFFECT) (white)
HL28W001
* Please note that the color of the product may slightly differ from the original due to display settings.
€14,10 EUR
Taxes included.
Shipping calculated at checkout.
Zakonska garancija
GPSR
Lucro sp. z o. o., ul. J. Smulikowskiego 4A lok. 16, 00 - 389 Warszawa, office.lucro@gmail.com
Description
The LED lamp combines 28 W of power, high brightness, and a wide 180° beam angle. Its 6000 K color temperature provides cool white light suitable for illuminating workspaces during photography and video recording. The 2800 lm luminous flux delivers intense, even illumination, while flicker-free operation helps maintain consistent image quality when recording videos.
The standard E27 screw base makes installation quick and convenient. The lamp requires no complicated installation and lights up immediately after switching on, without delay or flickering. Combining diffused lighting, high brightness, and ease of use, LOOMI HALO LED LIGHT is a practical solution for creating professional-looking visual content.
Technical specifications:
Power: 28 W;
Base type: E27, standard screw base;
Input voltage: AC 175–240 V;
Color temperature: 6000 K;
Luminous flux: 2800 lm;
Beam angle: 180°;
Flicker-free lighting;
Soft diffused light;
High brightness;
Easy installation;
Housing material: ABS/PC;
Protection rating: IP65;
Lifespan: at least 30,000 hours;
Diameter: 16 cm;
Warranty: 1 year.
Instructions for use and installation:
Switch off the power. Before installation, turn off the corresponding power switch and ensure that no electrical current is present to avoid the risk of electric shock.
Check compatibility. The lamp features a standard E27 screw base and is designed exclusively for sockets of this type. Do not attempt to install it in smaller E14 sockets or apply force.
Install the lamp. Hold the lamp by its heat sink base, align the threads with the socket, and carefully rotate clockwise until securely fitted. Do not over-tighten or use excessive force.
Check operation. Once installation is complete, switch on the power. The lamp lights up instantly, without delay or flickering.
Precautions:
Always switch off the electrical power before installation to prevent the risk of electric shock.
Use the lamp only with E27 sockets. Do not install it in E14 sockets.
Check that the lamp's rated voltage and electrical specifications are compatible with the power supply to prevent damage or burnout.
Do not apply excessive force when installing or tightening the lamp.
The standard E27 screw base makes installation quick and convenient. The lamp requires no complicated installation and lights up immediately after switching on, without delay or flickering. Combining diffused lighting, high brightness, and ease of use, LOOMI HALO LED LIGHT is a practical solution for creating professional-looking visual content.
Technical specifications:
Power: 28 W;
Base type: E27, standard screw base;
Input voltage: AC 175–240 V;
Color temperature: 6000 K;
Luminous flux: 2800 lm;
Beam angle: 180°;
Flicker-free lighting;
Soft diffused light;
High brightness;
Easy installation;
Housing material: ABS/PC;
Protection rating: IP65;
Lifespan: at least 30,000 hours;
Diameter: 16 cm;
Warranty: 1 year.
Instructions for use and installation:
Switch off the power. Before installation, turn off the corresponding power switch and ensure that no electrical current is present to avoid the risk of electric shock.
Check compatibility. The lamp features a standard E27 screw base and is designed exclusively for sockets of this type. Do not attempt to install it in smaller E14 sockets or apply force.
Install the lamp. Hold the lamp by its heat sink base, align the threads with the socket, and carefully rotate clockwise until securely fitted. Do not over-tighten or use excessive force.
Check operation. Once installation is complete, switch on the power. The lamp lights up instantly, without delay or flickering.
Precautions:
Always switch off the electrical power before installation to prevent the risk of electric shock.
Use the lamp only with E27 sockets. Do not install it in E14 sockets.
Check that the lamp's rated voltage and electrical specifications are compatible with the power supply to prevent damage or burnout.
Do not apply excessive force when installing or tightening the lamp.