Καταναλωτές: νόμιμη εγγύηση ΕΕ 2 ετών (Οδηγία 2019/771). Σε περίπτωση ελαττώματος, δικαιούστε επισκευή, αντικατάσταση ή επιστροφή χρημάτων. Επαγγελματικοί πελάτες: εμπορική εγγύηση 12 μηνών.
![Carbide Nail Drill Bit for Material Removal, Blue (Medium) [605002]](http://bsture.com/cdn/shop/files/lnbk-605002.jpg?format=webp&v=1792733601&width=4096)
Description
Bit 605002 is the choice of professionals who value power, precision and durability. Its medium-height cutting teeth make it ideal for intensive use in hardware manicure and pedicure.
The medium cross-cut pattern delivers consistent performance even on tough surfaces, letting technicians handle complex tasks with ease and control.
Recommended for:
• fast removal of acrylic, biogel, polygel and gel polish
• rough refinement of artificial coatings and nail architecture correction
• treatment of dense skin, calluses and thickened areas of the foot
• preparing the nail plate for advanced designs and sculpting
• speeding up rebalancing and extension procedures
Built for results: no overheating, no vibration and full control with precision.
Advantages:
• pressure on the cutting edges is distributed evenly
• the cutter works better and lasts longer
• high-quality stainless alloy – non-toxic
• Designed for autoclave and dry heat sterilisation
• Standard 2.35 mm shank (fits most manicure devices)
• Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
• Clean off any material residue,
• Rinse under running water,
• Dry completely before further processing,
• Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Luna Bits is a quality brand of nail bits for manicure and pedicure. Every bit is made with attention to detail to deliver precise, consistent results and long-lasting performance, so professionals and home users alike can rely on Luna Bits for flawless nail care.
The medium cross-cut pattern delivers consistent performance even on tough surfaces, letting technicians handle complex tasks with ease and control.
Recommended for:
• fast removal of acrylic, biogel, polygel and gel polish
• rough refinement of artificial coatings and nail architecture correction
• treatment of dense skin, calluses and thickened areas of the foot
• preparing the nail plate for advanced designs and sculpting
• speeding up rebalancing and extension procedures
Built for results: no overheating, no vibration and full control with precision.
Advantages:
• pressure on the cutting edges is distributed evenly
• the cutter works better and lasts longer
• high-quality stainless alloy – non-toxic
• Designed for autoclave and dry heat sterilisation
• Standard 2.35 mm shank (fits most manicure devices)
• Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
• Clean off any material residue,
• Rinse under running water,
• Dry completely before further processing,
• Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Luna Bits is a quality brand of nail bits for manicure and pedicure. Every bit is made with attention to detail to deliver precise, consistent results and long-lasting performance, so professionals and home users alike can rely on Luna Bits for flawless nail care.
Carbide Nail Drill Bit for Material Removal, Blue (Medium) [605002]
LNBK-605002
* Please note that the color of the product may slightly differ from the original due to display settings.
€12,81 EUR
Taxes included.
Shipping calculated at checkout.
Νόμιμη εγγύηση
GPSR
MOLIKO OÜ, Ehitajate tee 110, Tallinn, 13517, Estonia, sales@lunabits.eu
Description
Bit 605002 is the choice of professionals who value power, precision and durability. Its medium-height cutting teeth make it ideal for intensive use in hardware manicure and pedicure.
The medium cross-cut pattern delivers consistent performance even on tough surfaces, letting technicians handle complex tasks with ease and control.
Recommended for:
• fast removal of acrylic, biogel, polygel and gel polish
• rough refinement of artificial coatings and nail architecture correction
• treatment of dense skin, calluses and thickened areas of the foot
• preparing the nail plate for advanced designs and sculpting
• speeding up rebalancing and extension procedures
Built for results: no overheating, no vibration and full control with precision.
Advantages:
• pressure on the cutting edges is distributed evenly
• the cutter works better and lasts longer
• high-quality stainless alloy – non-toxic
• Designed for autoclave and dry heat sterilisation
• Standard 2.35 mm shank (fits most manicure devices)
• Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
• Clean off any material residue,
• Rinse under running water,
• Dry completely before further processing,
• Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Luna Bits is a quality brand of nail bits for manicure and pedicure. Every bit is made with attention to detail to deliver precise, consistent results and long-lasting performance, so professionals and home users alike can rely on Luna Bits for flawless nail care.
The medium cross-cut pattern delivers consistent performance even on tough surfaces, letting technicians handle complex tasks with ease and control.
Recommended for:
• fast removal of acrylic, biogel, polygel and gel polish
• rough refinement of artificial coatings and nail architecture correction
• treatment of dense skin, calluses and thickened areas of the foot
• preparing the nail plate for advanced designs and sculpting
• speeding up rebalancing and extension procedures
Built for results: no overheating, no vibration and full control with precision.
Advantages:
• pressure on the cutting edges is distributed evenly
• the cutter works better and lasts longer
• high-quality stainless alloy – non-toxic
• Designed for autoclave and dry heat sterilisation
• Standard 2.35 mm shank (fits most manicure devices)
• Individually packaged in blister packs to protect against counterfeiting
Recommendations for use:
After use, the burr must be:
• Clean off any material residue,
• Rinse under running water,
• Dry completely before further processing,
• Disinfect/sterilise using any convenient method.
Important! Do not drop the cutters on a hard surface. Do not squeeze them out of the blister pack; open it with a stationery knife.
Luna Bits is a quality brand of nail bits for manicure and pedicure. Every bit is made with attention to detail to deliver precise, consistent results and long-lasting performance, so professionals and home users alike can rely on Luna Bits for flawless nail care.